Landscape Products

Verazzo Stone - 1 piece

Verazzo logo

verazzo unit Verazzo pic


Keystone Verazzo StoneT is finished on two sides, allowing both 1- and 2-sided project designs. It features a natural stone look without the natural stone price and enhances any outdoor décor with natural colors and textures.


verazzo unit

  unit specifications
height 6"
width 12/16"
depth 10-1/2"
weight 68lbs
pins yes

Product size, weight, color and product availability varies by location. Please contact your local manufacturer for up-to-date product information.

verazzo vertical section verazzo setback section
shown in vertical position shown in setback position


Use this guide for estimating the number of Keystone Verazzo Stone units required.

WALL HEIGHT WALL LENGTH (measured at wall face including curves)
6' 12' 18' 24' 30' 36'
6" (1 course) 5 9 14 18 23 27
12" (2 courses) 10 18 28 36 46 54
18" (3 courses) 15 27 42 54 69 81
24" (4 courses) 20 36 56 72 92 108
30" (5 courses) 25 45 70 90 115 135
36" (6 courses) 30 54 84 104 138 162

  Maximum Height Vertical Position   Maximum Height Setback Position
  • Maximum wall height not to exceed 36". The maximum height is based on a level grade, total granular soil, wall built-in setback position, and no surcharge. Contact your local Keystone representative for design options on wall heights exceeding 36" or supporting surcharges and backslope
  • Change in color on the chart denotes the maximum wall height for vertical and setback positions.
  • Keystone recommends cap units as the top course and/or caps of freestanding walls secured with Keystone KapSealT adhesive.


step 1 step 2
STEP ONE | Prepare the Site STEP TWO | Set Base Course
Start by digging a shallow trench 12" deep by 24" wide. Cut through and remove any sod, roots or large rocks. Place a 6" leveling pad of compacted sand or gravel in the trench to receive the first course of Keystone Verazzo Stone. Place and level the first Keystone Verazzo Stone unit. Level each additional unit on the base course as you place it, making sure that the outside edges touch. If your wall contains both straight and curved areas, start with a straight area and build into the curves. Complete the base course before proceeding to the second course.
step 3 * Note: For straight line walls, unit faces can be alternated to create a more random look.

STEP THREE | Pin, Stack & Fill
Starting with straight areas first, begin placing the second course. Center each Keystone Verazzo Stone unit over the pins on the joints of the course below in a running bond pattern as shown. Now proceed to the next layer, backfilling as you go. For drainage between units and behind the wall, clean gravel or crushed stone is recommended.

Click on the images below to view a larger display.

Verrazo Stone
Photo 1
Verrazo Stone
Photo 2
Verrazo Stone
Photo 3
Verrazo Stone
Photo 4
Verrazo Stone
Photo 5
Verrazo Stone
Photo 6
Verrazo Stone
Photo 7
Verrazo Stone
Photo 8
Verrazo Stone
Photo 9
Verrazo Stone
Photo 10
Verrazo Stone
Photo 11
Verrazo Stone
Photo 12
Verrazo Stone
Photo 13
Verrazo Stone
Photo 14
Verrazo Stone
Photo 15
Verrazo Stone
Photo 16
Verrazo Stone
Photo 17
Verrazo Stone
Photo 18
Verrazo Stone
Photo 19
Verrazo Stone
Photo 20