PROFESSIONAL PAVER DESIGN AND INSTALLATION IN NORTHERN CALIFORNIA
1-888-610-1762
BEST HARDSCAPE CONTRACTOR

Landscape Products

Mini/Caps

mini logo

OVERVIEW

mini units standard 1

The Keystone Mini Unit is a great solution for smaller, non-critical applications. Easy to handle and easy to install, the 4" Mini Unit makes for an attractive wall on its own or can be used as an accent when integrated with the 8" (200mm) high Standard or Compact units. The proportion and scale of the Mini Unit blend well with brick and ledge stone typically found in residential construction. The unit can also be used as a 4" high cap unit to finish most wall installations. When used in this manner, the smooth top surface of the Mini Unit provides a project with the finished appearance of coping.


SPECIFICATIONS

Mini units
mini section

  mini / cap units universal cap
height 4" 4"
width 18" 18 / 14"
depth 10-1/2"
10-1/2"
weight 45 lbs 48 lbs

Product size, weight, color and product availability varies by location. Please contact your local manufacturer for up-to-date product information.

ESTIMATING

Use this guide for estimating the number of Keystone Mini units required.

WALL HEIGHT WALL LENGTH (measured at wall face including curves)
5' 10' 15' 20' 25' 30'
4" (1 course) 3 7 10 13 17 20
8" (2 courses) 6 14 20 26 34 40
12" (3 courses) 9 21 30 39 51 60
16" (4 courses) 12 28 40 52 68 80
20" (5 courses) 15 35 50 65 85 100
24" (6 courses) 18 42 60 78 102 120

Notes:

  • Maximum wall height not to exceed 24".The maximum height is based on a level grade,
    total granular soil, wall built-in setback position, and no surcharge. Contact your local Keystone
    representative for design options on wall heights exceeding 24" or supporting surcharges and
    backslope.
  • Change in color on the chart denotes the maximum wall height for vertical and setback positions.
  • Keystone recommends cap units as the top course and/or caps of freestanding walls
    secured with Keystone KapSealT adhesive.

INSTALLATION

Step 1 Step 2
STEP ONE | Prepare the base leveling pad. Remove all surface vegetation and debris. Step 1More ... STEP TWO | Install the base course. Place the first course of units. Step 2More ...
Step 3 Step 4
STEP THREE | Insert the fiberglass pins.
Place the pins into the holes. Step 3More ...
STEP FOUR | Install core fill & compaction. Provide crushed stone drainage fill. Step 4More ...
Step 5
STEP FIVE | Install additional courses.
Place the next course of units over the pins. Step 5More ...

Click on the images below to view a larger display.

Mini/Caps
Photo 1
Mini/Caps
Photo 2
Mini/Caps
Photo 3
 
Mini/Caps
Photo 4
Mini/Caps
Photo 5
Mini/Caps
Photo 6
 
Mini/Caps
Photo 7
Mini/Caps
Photo 8
Mini/Caps
Photo 9
 
Mini/Caps
Photo 10
Mini/Caps
Photo 11
Mini/Caps
Photo 12
 
Mini/Caps
Photo 13
Mini/Caps
Photo 14
Mini/Caps
Photo 15
 
Mini/Caps
Photo 16